Instruments

Feature (2)
  • 'Top trends' in test and measure
    National Instruments has identified three trends that will improve the efficiency of test and measurement systems in 2009.
  • Impulse testing requirements in the military
    Testing equipment to ensure it meets military standards has a long history and is usually more demanding than tests carried out on other equipment. While this story looks at American-specific methods, the requirements in Australia would be similar
Product (90)
  • Schaffner Modula-6100 immunity test system
    The Schaffner Modula-6100 immunity test system can be used for the simulation of electromagnetic interference effects. It is now available to rent.
  • Comtest buys 4128-D-002 head and torso simulator
    Comtest has invested in a head and torso simulator (HATS) that incorporates a type 3.3 artificial ear.
  • Dytran IEPE triaxial accelerometer model 3293A
    Dytran Instruments has released an IEPE triaxial accelerometer, Model 3293A, a lightweight, high-sensitivity accelerometer containing three miniature ceramic shear mode accelerometer elements mounted to a single support and welded into a titanium housing.
  • Flare gas meters
    The GF868 flare gas flowmeter now has extended velocity ranges to perform measurements under most of the conditions that may occur in a flare line either on or offshore.
  • Probe range extended
    Agilent has introduced two accessories for its InfiniiMax probes, an inline coaxial attenuator and a blocking capacitor.
  • Handheld tachometer
    SI Instruments has launched RheinTech’s Rotaro digital handheld tachometer.
  • Triaxial accelerometer
    Dytran Instruments has released a miniature triaxial accelerometer, using quartz shear technology, coupled with 2-wire internal IEPE electronics.
  • Mini accelerometer
    Dytran Instruments has introduced its latest model to the 3224A series of ultra miniature IEPE accelerometers.
  • Power meters
    The Hioki 3334 (AC, AC + DC, DC) and 3333 (AC) digital single-phase, 2-wire power meters are highly accurate instruments (±0.1% rdg ±0.1% fs for the 3334, and ±0.5% fs for the 3333) for power and energy measurement (max 1 h for 3333 and 10,000 h for 3334) even under highly distorted conditions with current crest factors as high as 300:1 for the 3334.
  • Optical testing
    The Yokogawa AQ2200 multi-application test system is suitable for measuring and evaluating a wide range of optical devices, including transmitters.
  • Impedance tester
    The Parameters model PA 2126NA loop impedance tester with PSC (prospective short circuit calculation) and volt meter is a multifunction tester for single-phase circuits, measuring line-to-earth, neutral-to-earth, line, neutral and earth impedances as separate quantities.
  • Load cells
    PCB Piezotronics has introduced a range of strain gauge dual bridge load cells specifically for airframe structural test applications. PCB series 1200 includes dual output that offers sensor redundancy and the ability to provide control feedback from one sensor while the other is used for data acquisition.
  • Light source and meter
    TechRentals has introduced the Kingfisher K17827 light source and K17600 power meter into its rental fleet.
  • Positioning system
    Bestech has released the PSE 37_/39_-14 positioning system solution for positioning auxiliary and positioning axes.
  • Vibration signal conditioner
    Bestech Australia has released the model 5005 vibration signal conditioner, from VIP Sensors.
  • Leak detector
    Fluke has introduced the RLD2 UV leak detector flashlight that uncovers refrigerant leaks instantly.
  • Bluetooth test set
    Anritsu has introduced the MT8855A, claimed to be the world’s first integrated test set capable of measuring the new generation of products using Bluetooth advanced audio distribution profile (A2DP), headset profile and hands-free profile, providing frequency coverage of 20 Hz to 20 kHz.
  • Device testing
    National Instruments has introduced two 32-channel PXI Express-based digital instruments and an eight-slot high-bandwidth PXI Express 3U chassis for automated test applications.
  • Electrostatic field meter
    TechRentals has introduced the Vermason 222 electrostatic field meter into its rental fleet.
  • Electrostatic field meter
    This handheld device is designed to measure electrostatic voltage and has a measurement range of 0 to 200 kV.
  • Waveform analysis
    Agilent has introduced three new measurement solutions for testing next-generation storage and telecommunications components and systems.
  • DC current transmitter
    Practical Control Solutions has released the CYHCT-S4 range of Hall effect transmitters for measuring DC current.
  • Battery tester
    The Cadex C5100 battery rapid-tester classifies batteries into good, low or poor categories. Simple operation means shop assistants can perform the 30 s test while a customer waits.
  • True-RMS AC ammeters
    Murata has introduced a series of digital AC ammeters with alarm for measuring and displaying complex, true-RMS, non-sinusoidal AC circuits.
  • Digital strainmeter
    Bestech Australia has released the TC-31K digital strainmeter from TML.
  • Field analyser
    The Taoma universal electromagnetic field analyser is suitable for measuring magnetic and electric fields in the frequency range from 5 Hz to 6 GHz by selecting interchangeable probes, isotropically or as single-axis measurements, and over bandwidths as determined by user-configurable band-pass, selective and notch filters.
  • True RMS voltmeters
    Murata has introduced a series of Datel voltmeters that are claimed to overcome the limitations of conventional average-responding AC voltmeters.
  • Model generation
    Agilent has claimed a breakthrough for its nonlinear modelling technique for components such as amplifiers and transistors.
  • High-impedance digitisers
    Agilent has expanded its Acqiris high-speed digitiser product range with more functionalities on its PXI digitisers.
  • AC power test
    The 3091LD is designed to provide precisely controlled nonlinear loads for testing AC power generation equipment such as UPSs, AC sources, electrical switches and circuit breakers.
  • Handheld instruments for inductance, capacitance, resistance measurements
    Agilent Technologies has introduced handheld instruments that provide greater convenience on the bench or in the field.
  • Wideband radio communication tester
    The R&S CMW500 marks the entry of a new generation of test equipment from Rohde & Schwarz. It allows fast and precise production testing of current and future wireless devices from a basic mobile phone to the most sophisticated PDA.
  • Multiport test set
    Agilent has added the 2/4 port, 20 GHz option to its ENA network analysers, as well as introducing an E5092A configurable multiport test set.
  • Software for power meters
    Anritsu has introduced PowerMax software providing an enhanced visualisation of instrument display and simplified remote control of the company’s ML2490A series power meters via ethernet.
  • Coherent OTDR
    Anritsu’s MW90010A OTDR (C-OTDR) uses a coherent detection scheme to produce improved dynamic range and sensitivity.
  • Field tester with VoIP
    Anritsu has released software version 3.5x for its CMA 3000 field tester.
  • Pulse/magnetic testing
    The basic Teseq NSG 3060 system is designed to fulfil requirements for CE mark and ANSI C62.41 testing, including Combination wave, Ring wave and EFT pulses as well as PQT.
  • High-voltage meters
    The Vitrek 4600A series precision high-voltage meters comprise three models providing measurement to 20, 40 and 70 kV DC and AC as true RMS values.
  • Multifunction tester
    Eaton has introduced the Kyoritsu 6016, 10-in-1 multifunction tester that is ergonomically styled with the top cover tucking in beneath the unit while in use.
  • Sound meter
    The testo 815 sound level meter has an accuracy of class 2 and is suitable for daily use whether it is for air conditioning or heating, disco noise, machine noise or noise in combustion systems.
  • Multiplay testers
    Agilent Technologies has introduced multiple test solutions that support the development and deployment of multiplay infrastructures.
  • Defibrillator analyser
    The Impulse 6000D defibrillator analyser and Impulse 7000DP defibrillator/transcutaneous pacer analyser test systems are rugged, portable precision test instruments that ensure proper operation and ultimate performance of critical life-support cardiac-resuscitation equipment.
  • Electrical safety analyser
    The ESA620 electrical safety analyser has a selection of three test loads, two protective earth test currents and two insulation test voltages to perform all primary electrical safety tests as well as several additional leakage tests for premium standards compliance worldwide.
  • Lightwave analyser
    Agilent has introduced the fourth member of its lightwave component analyser series, claimed to be the only turnkey test solution for CATV or radio over fibre electro-optical component test.
  • Precision ohm meter
    The KoCoS Promet 100 precision ohm meter is suited to tasks including earth bond and weld testing as well as circuit breaker main contact testing.
  • Calibration system
    The modular calibration system from GE Sensing and Inspection is a handheld test and calibration system that combines a multifunction calibrator with pressure measurement and generation capability.
  • Ground integrity meter
    Ground Pro has features designed to verify grounding parameters in any facility.
  • Automated safety analysers
    The Vitrek V60 series electrical safety analyser provides a choice of AC, AC and DC dielectric strength testing, with or without insulation resistance testing, and ground continuity testing in accordance with UL, CSA and IEC standards.
  • Switch and measure/control subsystem
    The EX1200 series is a high density switch and measure/control subsystem with the capacity to switch up to 576 channels of voltage or temperature in a single rack U mainframe. Mix and match a variety of modules to build a comprehensive signal switching and I/O subsystem that performs data logging, level detection and control.
  • Bluetooth tester
    Anritsu has introduced what it claims is the world’s first integrated test set to measure the new generation of Bluetooth low-energy products, as well as a solution to support the enhanced power control feature.
  • Pressure calibrator
    Fluke has announced the 719 series electric performance calibrators that feature a built-in electric pressure pump that makes it possible to quickly calibrate and test pressure devices with one hand.
  • 40G transponders
    Finisar has introduced the 52TR series 40G transponders for client-side applications.
  • Electrostatic voltage sensor
    Trek has introduced an electrostatic voltage sensor (model 875), designed for inline monitoring of electrostatic charge build-up, which if left unchecked would disrupt manufacturing processes and/or cause product degradation and early life failure of semiconductors and other charge-sensitive components.
  • 100,000 count datalogger multimeter
    Altronic Distributors has released an advanced autoranging multimeter designed for field servicing, labs and R&D centres.
  • Mini accelerometer
    Dytran has introduced an ultra-miniature IEPE accelerometer with titanium housing. Weighing 0.2 g, this miniature accelerometer reduces mass loading effects.
  • Boundary scan interface
    JTAG Technologies has released the JT 2147/AGP boundary scan interface for use with Aeroflex in-circuit testers.
  • Network analyser with 20 GHz analysis capabilities
    Agilent Technologies has announced the addition of the 2-/4-port, 20 GHz option to its ENA network analysers, as well as the introduction of an E5092A configurable multiport test set.
  • Positioning controller
    A second generation of the family of intelligent positioning controllers EPOS (easy to use positioning system), designed to control brush and brushless DC motors with encoder, is available from maxon motor.
  • Arbitrary noise generator
    Agilent has introduced what it claims is the industry’s first pulse function arbitrary noise generator that provides signal quality combined with versatile waveforms. It is suitable for general-purpose bench tests or serial data stress tests.
  • Linear measurement
    Available from IDM Instruments is the Celesco M150, claimed to be the world’s smallest cable extension transducer or string pot, measuring 1.9 x 1.9 x 1 cm.
  • Impedance analysers
    A range of precision impedance analysers with maximum frequencies ranging from 5 to 120 MHz for production, test and research applications has been introduced by Wayne Kerr Electronics.
  • Electrostatic discharge (ESD) simulator system
    The NSG 438 is a preventative instrument that detects the occurrence of a discharge and automatically updates the counter and pre-counter displays, making it suitable for long test runs. Simple and easy to use, operators can create and store conditions in the instrument’s memory for subsequent re-use.
  • Measurement instruments
    Rohde & Schwarz measurement instruments feature the accuracy and range needed in order to test OFDMA  systems reliably.
  • Handheld next-generation broadband DSL test set
    VeEX VePAL BX100AT Broadband Expert is a next-generation testing solution for ADSL and ADSL 2+ networks supporting voice, data and video services.
  • Handheld VoIP tester
    NetTool VoIP covers the entire spectrum of tasks required to deploy IP phones to the desktop.
  • AC tester
    Altronics has released an AC non-contact tester that detects live AC voltages from 100 to 600 V (50-60 Hz) and allows detection of live wires without contact. The tester illuminates red whenever AC is detected at a power point, sheathed or bare-ended cable. It is also equipped with an LED flashlight for lighting the way in rooftops or wall cavities.
  • Baseband signal analyser
    The FMU36 is an instrument based on the FSQ with the options FSQ-B71 and FSQ-B70 targeted at the analysis of signals in the baseband.
  • Design, control and test enhanced
    National Instruments has announced LabVIEW 8, a major upgrade to its graphical development platform in design, control and test.
  • Rogue wireless device finder
    Fluke has released new features for its EtherScope Series II Network Assistant. Security scan and locate features reduce the time taken to find rogue wireless local area network devices by 75%, as measured by the time spent on the same task using an omni-directional antenna found on most PC radio cards.
  • Agilent's compact, low-power digitiser maximises measurement throughput
    Agilent Technologies has introduced its first digitiser from the Acqiris product line which it acquired in November 2006.
  • Frequency analysis
    Caterpillar is a low-cost, handheld sweeping analyser designed for 802.11(b,a,g) Wi-Fi frequency and power measurements.
  • Contact thermometer
    The Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05% + 0.3°C) in a rugged, handheld test tool.
  • Capacitance meter
    The BK Precision capacitance meter 830B, is a compact, handheld, lightweight, battery-powered test unit featuring a 4½ digit LCD, 11,000 count resolution and nine automatically selected ranges with full-scale value from 1.0 pF to 199.99 mF.
  • Pulse function arbitrary noise generator
    Agilent Technologies has introduced a pulse function arbitrary noise generator, which provides superior signal quality combined with versatile programmable waveforms. It is suitable for general-purpose bench tests or advanced serial data stress tests.
  • Simplify test system development and control
    Agilent says its I/O Libraries Suite, GPIB cards and converters that work with industry-standard software development environments, such as Agilent VEE Pro and Microsoft development languages, now works with National Instruments LabVIEW and LabWindows.
  • Optical inspection scanner system
    The ScanInspect VPI from ScanCAD checks boards, films and stencils to ensure they are correct before assembly. The system also inspects work-in-progress for assembly defects.
  • Voltage reference
    Dallas Semiconductor has introduced the DS4303, claimed to be the world's first sample-and-infinite-hold voltage reference.
  • Ground bond testers
    The range of Extech model 7300 ground bond safety testers is available with injection capability ranging from 30 to 60 A.
  • Portable infrared thermometer
    The MiniTemp IR thermometer - a new way to solve common problems.
  • GPIB controller
    The compact National Instruments GPIB-USB-HS transforms any computer with a USB port into a full-function, plug-and-play IEEE 488.2 controller for up to 14 programmable GPIB instruments.
  • Multifunction electrical tester
    Fluke has released its multifunction electrical tester calibrator, the 5320A.
  • Validation testing
    The Qualmark Typhoon 1.5 HALT (highly accelerated life test) chamber provides users with the ability to test the stability and reliability of electronic and electro-mechanical products at an early stage in the design and development process.
  • Switching and control instruments
    Agilent offers a family of LXI (LAN eXtensions for Instrumentation) instruments for switching and control that includes the 34980A switch/measure mainframe and associated plug-in cards and the 1U, half-rack width L4400 series standalone modules.
  • Panel meters, transducers
    Reltronics has released a range of DIN rail mounted multifunction panel meters, transducers, transmitters and power meters for a variety of measurements including: V, A, W, VAR, Wh, VARh, pf, Hz, rpm, counter, ohm, J/K/T/E/S/R thermocouples, RTD, temperature, humidity and pulse.
  • Portable thermo-hygrometer
    The HD 200 portable thermo-hygrometer measures relative humidity from 3 to 98% RH, absolute humidity (from 0 to 190 g/kg), dewpoint from -20 to +80°C, psychrometry and ambient temperature.
  • Instrument controller
    Engineers now can use the National Instruments ExpressCard-GPIB controller for high-speed instrument control on a notebook computer.
  • Test system development tools
    Agilent Open, a program that simplifies test-system setup and integration by offering instruments based on open industry standards, has been introduced by Agilent Technologies.
  • Instrumentation catalogue
    Turck has published a catalogue that incorporates its range of instrumentation products. Now all Turck products for instrumentation applications can be accessed from a single source.
  • Rent the Prodig-5 TV explorer
    If you're a technician working on TV systems then you'll be interested in the Prodig 5 TV Explorer. A function generator, it's designed to assist with the installation, maintenance and surveillance of terrestrial, satellite and cable TV systems.
  • Digital manometer
    The Keller Leo-Record and Record Eex ia are compact digital instruments that measure both pressure and temperature.
News (19)
  • Olympic structures being monitored
    The China Earthquake Administration, the government body managing the country’s earthquake preparedness and disaster mitigation, has selected a structural health monitoring system developed by National Instruments Alliance Partner CGM Engineering.
  • Australian representative for electrical safety testers appointed
    Westek Electronics has been appointed as Vitrek Corporation's Australian Representative.
  • Process developed for measuring breakdown voltage
    Air is a great insulator--except when it becomes a conductor. Under the right conditions, miniature lightning bolts of electricity will ‘arc’ through the air between two electrically conducting points.
  • New distributors
    Fluke Australia has announced three new distribution agreements. The newly formed Testing Equipment Solutions (TES) has been appointed the distributor of Fluke precision measurement instruments in Queensland, while NSW distribution will be handled by IPI. Triple Point Calibration (TPC) will service Victoria, Tasmania, South Australia, Northern Territory and Western Australia.
  • Online summit for automated test
    National Instruments is hosting the fourth annual Automated Test Summit online, which will feature technical sessions focused on identifying trends and overcoming new challenges in automated test.
  • Instrument winner
    Anritsu has received the Frost & Sullivan Award for Product Line Strategy Leadership in the combined markets for signal generators, vector network analysers and spectrum analysers. The award recognises that the company "demonstrated the most insight into customer needs and product demands" and met stringent criteria established by Frost & Sullivan's analyst team.
  • Distributor appointed
    Trio Smartcal has a new role as the distributor for Agilent Technologies for Qld, NSW, ACT, Vic and Tas. Also covered will be defence accounts in SA. Trio Smartcal will sell Agilent’s ‘basic instrument’ range of general-purpose test and measurement products.
  • New regional service centre opened in Singapore
    Aeroflex has opened a regional service centre in Singapore that enables the Aeroflex Test Solutions (ATS) division to provide instrument service support to its users within the major growth markets in Asia.
  • Collaboration on virtual instrumentation
    Electronics industry giants, National Instruments and Texas Instruments are collaborating with Spectrum Digital in the development of the TI C55X Power Optimisation DSP Starter Kit (DSK), a DSP design tool to offer designers incorporated test and measurement functionality.
  • Cooperation agreement extended
    The Institute of Instrumentation, Control and Automation Australia (IICA) and Reed Exhibitions have signed a two-year agreement for ICEX, the exhibition section of IICA, to again be part of National Manufacturing Week for the next two years.
  • Yokogawa appoints distributor
    Yokogawa has appointed Triple Point Calibrations as a distributor of its Recorder & Data Acquisition range of products for SA and the NT.
  • Emona awarded for ICT innovation
    Emona Instruments has received a Highly Commended placing in the "Learning" category at the fifth Secrets of Australian ICT Innovation Competition Awards Ceremony in March.
  • Open standard celebrates 10th anniversary
    The PXI Systems Alliance (www.pxisa.org) has announced the 10th anniversary of the PXI (PCI eXtensions for Instrumentation) specification, the PC-based modular I/O platform for test, measurement and control systems.
  • Distribution changes
    Rohde & Schwarz Australia has announced that from 30 June 2007, Trio Smartcal will no longer be a Rohde & Schwarz distributor.
  • IDM to relocate to larger facility
    IDM Instruments, an Australian manufacturer of testing and measuring instruments, has relocated to Hallam in Victoria to a larger facility.
  • Australian representative for electrical safety testers
    Vitrek Corporation, a US instrumentation manufacturer, has appointed Westek Electronics as the Australian representative for electrical safety testers and its other test equipment.
  • Yokogawa moves
    Yokogawa Australia has moved its central Queensland facility from Rockhampton to larger premises in Gladstone.
  • Farnell InOne gains electrostatic standard
    Farnell InOne has become the first company in Australia to achieve the Standards Mark for the Certification of Electrostatic Sensitive Devices from the certified testing body SAI Global.
  • Fluke acquires LEM
    Fluke has acquired LEM Instruments, a division of LEM Group, a European manufacturer of test and measurement equipment including analysers and systems for power quality applications, earth/ground testers, insulation testers, low-resistance ohmmeters, clamp meters and clamp-on power meters. LEM also supplies current probes to the automotive market.
© 2010 Westwick-Farrow Pty Ltd. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of our Terms and Conditions and Privacy Policy.
Get your FREE membership today - CLICK HERE  |  Log-in