Oscillators

Product (44)
  • Crystek CCHD-957 clock oscillator
    Crystek Corporation has launched the CCHD-957, an ultra-low phase noise HCMOS clock oscillator with standby mode, featuring a low close-in phase noise of -100 dBc/Hz at 10 Hz offset and a typical noise floor of -170 dBc/Hz at 100 kHz offset.
  • Sorensen SG programmable power supplies
    The water-cooled (or water-ethylene glycol) Sorensen SG series of programmable power supplies have output voltages of 40 and 60 DC and ratings of 5, 10 or 15 kW (max current of 375 A) outputs in a 3U chassis. Up to five chassis can be paralleled for a maximum power of 75 kW.
  • Crystek CVCO55CC-2230-2430 voltage controlled oscillator
    Crystek's CVCO55CC-2230-2430 VCO (voltage controlled oscillator) operates from 2230 to 2240 MHz with a control voltage range of 0.1 to 4.9 V.
  • Crystek CVCO55CW-3050-4250 voltage controlled oscillator
    Crystek’s CVCO55CW-3050-4250 VCO operates from 3050 to 4250 MHz, with a control voltage range of 1.5 to 18.5. This VCO features a typical phase noise of -85 dBc/Hz at 10 kHz offset and has good linearity. Output power is typically +1.5 dBm.
  • Crystek CVCO55CCQ-2005-2070 voltage controlled oscillator
    Crystek’s CVCO55CCQ-2005-2070 VCO (voltage controlled oscillator) operates from 2005 to 2070 MHz with a control voltage range of 0.1 to 4.9. The device features a typical phase noise of -114 dBc/Hz at 10 kHz offset and has good linearity. Output power is typically +5 dBm.
  • Crystek CVCOT8BE-2400-2500 TO-8 voltage controlled oscillator
    Crystek’s CVCOT8BE-2400-2500 TO-8 VCO (voltage controlled oscillator) operates from 2400 to 2500 MHz and provides control in harsh, demanding environments.
  • Crystek CVCO55CXT-5800-5800 coaxial resonator oscillator
    Crystek’s CVCO55CXT-5800-5800 coaxial resonator oscillator family is a coaxial-based VCO with an internal frequency doubler. The frequency doubling, 2X fundamental technology is claimed to have lower phase noise and much lower harmonics, while achieving lower current consumption.
  • Crystek Corporation CCHD-575 CMOS oscillator
    Crystek Corporation has launched the CCHD-575, an ultra-low phase noise CMOS oscillator providing a -168 dBc/Hz noise floor.
  • Crystek CVCO55CXT-6250-6250 coaxial resonator oscillator
    Crystek’s CVCO55CXT-6250-6250 coaxial resonator oscillator is a coaxial-based VCO with an internal frequency doubler. The family’s frequency-doubling 2X fundamental technology achieves lower current consumption.
  • Crystek CVCO55CC-3475-3475 VCO voltage controlled oscillator
    Crystek’s CVCO55CC-3475-3475 VCO (voltage controlled oscillator) operates at 3475 MHz with a control voltage range of 0.5 to 4.5. The device features a typical phase noise of -115 dBc/Hz at 10 KHz offset and has good linearity. Output power is typically +7 dBm.
  • Crystek CVCO55CC-0827-0840 voltage controlled oscillator
    Crystek’s CVCO55CC-0827-0840 voltage controlled oscillator (VCO) operates from 827 to 840 MHz with a control voltage range of 0.2 to 4.7. The VCO features a typical phase noise of -124 dBc/Hz at 10 kHz offset and has good linearity. Output is typically -6.5 dBm.
  • Crystek CVCO55CC-2850-2950 voltage controlled oscillator
    Crystek’s CVCO55CC-2850-2950 VCO voltage controlled oscillator operates from 2850 to 2950 MHz with a control voltage range of 0.3 to 4.7 V.
  • Crystek CVCO55CC-3500-3700 voltage controlled oscillator
    Crystek‘s CVCO55CC-3500-3700 VCO (voltage controlled oscillator) operates from 3500 to 3700 MHz with a control range of 0.1 to 16 V.
  • Crystek CVCO55CC-2515-2530 VC oscillator
    Crystek’s CVCO55CC-2515-2530 VCO (voltage controlled oscillator) operates from 2515 to 2530 MHz with a control voltage range of 0.3 to 4.7. This VCO features a typical phase noise of -116 dBc/Hz at 10 KHz offset and has good linearity. Output power is typically +4.5 dBm.
  • Crystek CVCO55FLM VCOs with extra port
    Crystek’s CVCO55FLM VCOs contain an extra modulation port (TX modulation), making the family suitable for transmitter applications. The modulation port has a negative slope and a typical modulation sensitivity of -20 KHz/V.
  • Crystek CVCO55FLM voltage controlled oscillator
    Crystek’s CVCO55FLM voltage controlled oscillators (VCOs) contain an extra modulation port (TX modulation), making the family suitable for transmitter applications. The modulation port has a negative slope and a typical modulation sensitivity of -20 KHz/V.
  • Crystek CVCO55C-1850-1850 voltage controlled oscillator
    Crystek’s CVCO55CC-1850-1850 VCO (voltage controlled oscillator) operates at 1850 MHz with a control voltage range of 0.5 to 4.5 V. It has a typical phase noise of -117 dBc/Hz at 10 kHz offset with good linearity. Output power is typically +2.5 dBm.
  • RF Micro Devices RFVC975x laminate-based VCOs
    RF Micro Devices has available its latest family of laminate-based VCOs for mobile infrastructure and other high-performance wireless transceiver applications.
  • MtronPTI LCC clock oscillators
    MtronPTI has released clock oscillators for down-hole drilling and other harsh environment applications.
  • Crystek CPLL66-3475-3475 PLL/synthesiser
    Crystek’s CPLL66-3475-3475 PLL/synthesiser operates at 3475 MHz with a typical step size of 2500 kHz.
  • Crystek CRBV55FL-0200-0239 RedBox VCO
    Crystek’s CRBV55FL-0200-0239 RedBox voltage controlled oscillator operates from 200 to 239 MHz with a control voltage range of 0.5~4.5 and has a typical phase noise of -123 dBc/Hz at 10 kHz offset with good linearity. Output power is typically +9 dBm.
  • VC oscillator
    Crystek’s CRBV55CL-0902-0928 RedBox VCO operates from 902 to 928 MHz with a control voltage range of 0.5~4.5 with a typical phase noise of -115 dBc/Hz at 10 kHz offset and good linearity. Output power is typically +5 dBm.
  • PLL/synthesiser
    Crystek’s CPLL58-1800-1860 PLL/synthesiser operates from 1800 to 1860 MHz with a typical step size of 10 kHz.
  • Crystek’s CPLL66-2416-2553 PLL/synthesiser
    Crystek’s CPLL66-2416-2553 PLL/synthesiser operates from 2416 to 2553 MHz with a typical step size of 100 kHz. The CPLL66-2416-2553 is housed in an SMD package.
  • SAW clock oscillator
    Crystek Crystals has released a 1.090 GHz SAW clock oscillator, the CCSO-014-1090.
  • Crystek’s CPLL66-1600-2200 PLL/synthesiser
    Crystek’s CPLL66-1600-2200 PLL/synthesiser operates from 1600 to 2200 MHz with a typical step size of 1000 kHz.
  • Crystek’s CRBV55CW-0200-0400 VC oscillator
    Crystek’s CRBV55CW-0200-0400 Red Box VCO operates from 200 to 400 MHz with a control voltage range of 0.0 to 5.0. The device has a typical phase noise of -105 dBc/Hz at 10 kHz offset with good linearity. Output power is typically +3 dBm.
  • Crystek’s CRBV55FL-0136-0174 VC oscillator
    Crystek’s CRBV55FL-0136-0174 Red Box VCO operates from 136 to 174 MHz with a control voltage range of 0.5 to 4.5.
  • 35 mA oscillator
    Crystek’s CVCO55CC-3318-3467 VCO (voltage controlled oscillator) operates from 3318 to 3467 MHz with a control voltage range of 0.1 to 16.
  • Crystek's CVCO55CC-2594-3026 VC oscillator
    Crystek's CVCO55CC-2594-3026 VCO operates from 2594 to 3026 MHz with a control voltage range of 0.1 to 16 V. The VCO features a typical phase noise of -106 dBc/Hz at 10 kHz offset and has good linearity. Output power is typically +5 dBm.
  • Reference oscillator
    Crystek has introduced the RF pocket reference oscillator series, claimed to be the industry's first frequency control product to integrate a complete true sinewave SAW oscillator in an SMA housing.
  • Oscillator
    Crystek’s CVCO55CC-1700-1700 VCO operates at 1700 MHz with a control voltage range of 0.3-4.7. It features a typical phase noise of -120 dBc/Hz at 10 kHz offset and has good linearity. Output power is typically +2.5 dBm.
  • Crystek’s CVCO55CC-1581-1581 VC oscillator
    Crystek’s CVCO55CC-1581-1581 VCO operates at 1581 MHz with a control voltage range of 0.5-4.5.
  • Crystek’s CVCO55CC-3015-3045 VC oscillator
    Crystek’s CVCO55CC-3015-3045 VCO (voltage controlled oscillator) operates from 3015 to 3045 MHz with a control voltage range of 0-5-4.5 V.
  • Oscilloscopes with PCIe and USB protocol analysis
    Agilent Technologies has expanded its mixed-signal and digital-storage oscilloscope portfolio with six new models that comprise its next-generation Infiniium 9000 Series.
  • Crystek voltage controlled oscillator
    Crystek’s CVCO55CC-2745-2860 voltage controlled oscillator operates from 2745 to 2860 MHz with a control voltage range of 0.5~4.5. Typical phase noise is 106 dBc/Hz at 10 kHz offset with good linearity. Output power is typically +4 dBm.
  • Crystal oscillator
    Epson Toyocom has developed what it claims is the world’s smallest 32.768 kHz crystal oscillator.
  • Crystek’s CVCO55CC-1370-1400 VC oscillator
    Crystek’s CVCO55CC-1370-1400 VCO (voltage controlled oscillator) operates from 1370 to 1400 MHz with a control voltage range of 0.5<0x007E>4.5.
  • GPS oscillators
    MtronPTI has introduced the M9100 series of global positioning system disciplined oscillators (GPSDO), a small device designed to meet military environmental requirements and timing system demands including holdover. It is suitable for man-pack, vehicle-mount and airborne applications.
  • Low-noise VCO
    Z-Communications has announced an RoHS-compliant VCO (voltage-controlled oscillator) model CRO1220A-LF L-band. The device operates at 1220 MHz with a tuning voltage range of 0-5 DC, has a typical phase noise of -118 dBc/Hz at 10 kHz offset and a typical tuning sensitivity of 2 MHz/V.
  • SAW-based VCO
    Crystek Corporation has released its CVS575S-500 — a 500 MHz voltage controlled SAW (surface acoustic wave) oscillator, or VCSO.
  • Crystek’s CVCO55FL-0075-0085 VC oscillator
    Crystek’s CVCO55FL-0075-0085 VC oscillator operates from 75 to 85 MHz with a control voltage range of 0.5 to 4.5 and features a typical phase noise of -123 dBc/Hz at 10 kHz offset and has good linearity. Output power is typically +9.0 dBm.
  • Oscillator series
    MitronPTI has announced the XO5166 and XO5167 series of HCMOS output OCXO oscillators.
  • Voltage controlled oscillator
    Crystek’s CVCO55CC-3901-4101 VCO (voltage controlled oscillator) operates from 3901 to 4101 MHz with a control voltage range of 0.1-16.
News (1)
  • Global deal
    Mouser Electronics has signed a worldwide distribution agreement with Vectron International.
© 2012 Westwick-Farrow Pty Ltd. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of our Terms and Conditions and Privacy Policy.
WFonline: Vital and informative media
Get your FREE membership today - CLICK HERE  |  Log-in