-
Recom R1S/E RO/E RB/E DC/DC converter series
The R1S/E, RO/E and RB/E series of 1 W DC/DC converters from Recom have been designed for use in low power applications including battery-operated products, green energy products and general isolation and DC conversion applications.
-
ZMD ZLED7015 step-up converter
ZMD has introduced its first step-up converter with an integrated 35 V power switch for high brightness LEDs.
-
Diodes AP6502/AP6503 buck converters
Diodes has introduced a pair of integrated synchronous DC/DC buck converters.
-
Recom 1 W DC/DC converters
Recom’s 1 W converters were designed for low power applications requiring efficiency at low loads to meet limited energy budgets.
-
RECOM PowerlinePLUS DC/DC converters
RECOM has extended its PowerlinePLUS-family of DC/DC converters with the RPR-series, specifically tailored to railway applications. The compact devices work under extreme operating conditions without derating and are designed for input voltages of up to 160 DC.
-
Mean Well SKA20 DC/DC converters
The SKA20 series of DC/DC converters from Mean Well provides a single regulated output from a small DIP package with standard pin assignment.
-
National Semiconductor DAC161P997 16-bit DAC
National Semiconductor has introduced a 16-bit digital-to-analog converter (DAC) featuring a single-wire interface and 4 to 20 mA current loop drive that simplifies the design of smart transmitters used in industrial two-wire sensor systems.
-
RECOM R0.25S DC/DC converters
RECOM has released the R0.25S series of converters in open frame SMD design with improved efficiency and extended ambient temperature. The compact 0.25 W single output devices can be used in many industrial low power applications and are also approved for medical applications.
-
Powerbox IBC 050/048 VI Brick Intermediate bus converter series
Powerbox has released the latest additions to its IBC 050 and IBC 048 series of VI Brick Intermediate bus converters. The family already comprises over 12 models, in eighth- and quarter-brick formats, delivering from 300 to 750 W.
-
Recom RAC-06 AC/DC converter
Recom has extended its family of isolated AC/DC-power modules with fully regulated single or dual outputs for applications with low power or standby function.
-
Recom RAC01/RAC02/RAC03 AC/DC converters
Recom has released a range of isolated AC/DC power supply modules with low standby input currents and suitable for low power applications or standby power supplies.
-
Jaycar 24 V-12 V DC-DC converter 5A with USB
For those with a 24 V vehicle such as a truck or bus, finding accessories like chargers and power supplies that run off 24 V can be near impossible. This device converts 24 VDC to 12 VDC so that normal car accessories designed for 12 V vehicles can be used.
-
Linear Technology LTC2145 low-power ADC range
Linear Technology has introduced a family of ultralow-power 14 and 12 bit, 25 to 125 Msps analog-to-digital converters that dissipate less than 1 mW per mega sample per second from a 1.8 V supply.
-
Texas Instruments TPS54618 monolithic synchronous switcher
Texas Instruments has released a 6 A converter, claimed to be the industry’s smallest and most efficient.
-
Phihong PSM36W-120TW2 desktop adapter
Phihong has developed an energy-efficient, 36 W, class 2 universal desktop adapter.
-
Linear Technology LTC2655 digital-to-analog converter family
Linear Technology has introduced the LTC2655, a quad voltage output 16- and 12-bit digital-to-analog converter family with internal reference and I2C interface.
-
Texas Instruments audio codecs and digital-to-analog converters
Audio codecs and digital-to-analog converters for ebooks, mobile internet devices and portable navigation devices have been released.
-
Vicor PI3101 cool-power high-density isolated DC-DC converter
Vicor has released the PI3101 cool-power high-density isolated DC-DC converter that is suitable for end systems such as telecom and wireless infrastructure, networking and communications, power-over-ethernet applications and high-speed server platforms.
-
Tektronix and SenarioTek customisable standard solution
Tektronix and SenarioTek have announced a customisable standard solution for wideband microwave frequency up/down conversion.
-
National Semiconductor and Silicon Laboratories quarter-brick board
National Semiconductor and Silicon Laboratories have announced a quarter-brick isolated DC-DC converter evaluation board and reference design to help power supply designers get higher power density in networking, communications and high-end server applications.
-
Moxa CSM-200 series slide-in ethernet-to-fibre modules
Moxa has released the CSM-200 series of slide-in ethernet-to-fibre modules for the NRack System.
-
Farnell LTC3521 buck-boost with step-down DC/DC converters
The LTC3521 combines a synchronous 1A buck-boost DC/DC converter with dual 600 mA synchronous step-down DC/DC converters to offer three output rails with efficiencies as high as 95%. Its input range of 1.8 to 5.5 V makes it compatible with all types of PC card slots, USB and single-cell Li-Ion or dual/triple-cell alkaline/NiCd/NiMH applications.
-
Moxa IMC-P101 series industrial PoE media converters
Moxa has announced the IMC-P101 series UL508-certified industrial PoE media converters that provide IEEE 802.3af PoE ethernet-to-fibre media conversion from 10/100BaseT(X) to 100BaseFX(SC/ST) in a -40 to 75°C operating temperature range in harsh environments.
-
ICP Electronics ISC-4110U/8110U industrial media converter series
ICP Electronics has launched the ISC-4110U/8110U industrial media converter series. The 4110U offers USB to 4x RS232 serial ports, while the 8110U features USB to 8x RS232 serial ports.
-
Emco FS series miniature DC to high-voltage DC converters
Powerbox has released the FS series of miniature DC to high-voltage DC converters from Emco.
-
Mornsun URA_LD-20 W DC/DC converter
Mornsun has launched a 4:1 wide input, dual output 20 W isolation DC/DC converter URA_LD-20 W which meets EMI standards.
-
Linear Technology LTC3108 step-up DC/DC converter
Linear Technology has released the LTC3108, a highly integrated step-up DC/DC converter designed to start-up and run from extremely low input voltage sources such as thermoelectric generators (TEGs), thermopiles and small solar cells.
-
Mornsun URA_LD-20W DC/DC converter
Mornsun has launched a 4:1 wide input, dual output 20 W isolation DC/DC converter URA_LD-20W that meets EMI standards. It is a 20 W device with an ultra wide input voltage range of 9-36 and 18-75 with dual outputs and 1500 VDC isolation.
-
Powerbox PB315 high-efficiency converter
Powerbox has designed a high-efficiency converter to supply locomotive headlights. The dual output PB315 replaces dropping resistors currently used to dim incandescent headlights on locomotives.
-
Mornsun SMD B_T-2W series DC/DC converter modules
Mornsun has released an ultrasmall SMD B_T-2W series of 1 KV isolated, high-performance DC/DC converter modules.
-
Murata isolated 1 W single output DC/DC converters
Murata has released a series of isolated 1 W single output DC/DC converters with good efficiency levels and full-load performance across the industrial temperature range.
-
RF Micro Devices RFFC0085 frequency converter integrated circuit
RF Micro Devices has introduced the RFFC0085 frequency converter integrated circuit (IC).
-
North Atlantic 55MQ2 next-generation 3U, cPCI DC/DC converter
North Atlantic Industries (NAI) has available its next-generation 3U, cPCI DC/DC converter. The 55MQ2 provides 150 W (+5, +3.3 and ±12 VDC) at full load over its operating temperature range of -55 to +85°C (conduction cooled and measured at card edge).
-
austriamicrosystems AS1344 high-voltage DC-DC boost converter
austriamicrosystems has launched the AS1344 high-voltage DC-DC boost converter optimised for biasing photodiodes, LCD or PMOLED displays powered from single-cell batteries.
-
National Semiconductor dual 16-bit 160 MSa/s pipeline ADC
National Semiconductor has introduced what is claimed to be the first dual-channel 16-bit, 160 MSa/s pipeline analog-to-digital converter (ADC).
-
Buck converter monitor
International Rectifier has introduced the IR3527 XPhase dual-phase IC that drives and monitors two phases of a multiphase synchronous buck converter.
-
Linear Technology DC/DC converter
Linear Technology has announced the H-grade version of the LT3972, a 3.5 A, 33 V step-down switching regulator with burst mode operation to keep quiescent current under 75 µA.
-
Receiver subsystem
Linear Technology has introduced the LTM9002, a dual IF/baseband receiver subsystem that includes a dual 14-bit analog-to-digital converter sampling up to 125 MSps, anti-aliasing filters, fixed gain differential ADC drivers and 12-bit, trim digital to analog converters.
-
Metering ADC
Microchip Technology has announced its analog front end for metering applications.
-
Sensor ADCs
Linear Technology has introduced the LTC4260 and the LTC2462, a pair of 16-bit delta sigma ADCs that integrate a precision reference.
-
Boost converter
Linear Technology has announced the LT8415, a low-noise micropower boost converter with integrated dual half-bridge switches.
-
PCB AC-DC converters
Cosel has introduced the LFA series of PCB AC-DC converters, an upgraded version of the company’s simple PCB single-output LDA series, to meet increasing demands for miniaturisation and low cost.
-
DC/DC converters
Murata has introduced a range of isolated single output DC/DC converters that have 3 W of available power in a previously rated 2 W package giving space savings of up to 68%.
-
CBS450 series DC/DC converters
The CBS450 series of high-density DC/DC converters consists of two standard models offering 48 VDC input and outputs of 24 and 28 VDC.
-
DC/DC converter
Murata has added a miniature 3 A, SIP model to its Okami family of non-isolated point-of-load DC/DC converters.
-
UWE series DC/DC converters
Murata has extended its UWE series of eighth-brick, 4:1 ultra-wide input isolated DC/DC converters with the addition of two models.
-
Recom DC/DC power converters
Recom has released what it claims is a first with a 20 to 50 W power range of DC/DC converters.
-
NCS6 series DC/DC converters
Murata has introduced a range of isolated 6 W, wide 4:1 input, single output DC/DC converters for use in a wide range of applications including telecommunications, battery-powered systems, process control and distributed power supplies.
-
AC signal converter
Bestech Australia has released the TZ-1DA AC signal isolation transducer, from Asahi Keiki.
-
Mono DAC
Wolfson Microelectronics has announced the WM9081, a single-chip mono DAC and speaker amplifier, suitable for delivering optimum sound pressure levels and maximum intelligibility from low-cost speakers, typically used in portable navigation devices, mobile handsets, digital radios and conference speakerphones.
-
Wide input converters
Powerbox has added the eight wide-input micro DC-DC converters to its 28 VDC input family.
-
Switchmode converter
Imark Communications has released the DC2412-151 DC-DC converter for industrial applications where it is necessary to have the 24 VDC input fully isolated from the 13.8 VDC output.
-
Quad sampling converter
Murata has introduced a quad sampling analog to digital converter for image processing where low noise performance and the ability to convert full-scale step input signals at a 10 MHz conversion rate is required.
-
LGA DC/DC converters
The latest addition to the Okami family of non-isolated point-of-load DC/DC converters from Murata, the OKL range, features the inspectable land grid array package.
-
NTF series DC/DC converters
NTF series 1 W surface-mount isolated DC/DC converters from Murata are integrated, IC-style true surface-mount packages. The wide input range devices are suitable for battery-powered products plus a wide range of other applications, especially those where high volume is expected.
-
Rectifier IC
International Rectifier has expanded its family of SmartRectifier ICs with the introduction of the IR1168 for AC-DC power converters for high-end LCD TVs.
-
Input power monitor
International Rectifier has introduced the IR3725 input power monitor IC with digital I2C interface for low-voltage DC/DC converters used in CPU, server and storage applications.
-
UE130 DC/DC converters
UE130 isolated wide-range DC/DC converters from Murata deliver a full 30 W output power from a board area of just 7 cm2. Designed for PCB mounting, the modules deliver DC regulated power and are for use in both battery- and mains-powered equipment in applications requiring wide input voltage, such as small instruments, computer-based systems, datacoms equipment, remote sensor systems and vehicle electronics.
-
Quarter brick converter
The HPQ series from Murata is an ultra-high-power quarter brick, isolated DC/DC converter.
-
Bus converter
Powerbox has released Vicor’s VI Brick BCM bus converter, a member of the VI Brick family that provides a modular power platform for power solutions.
-
Media converter
GE Digital Energy has announced the Multilin MultiNet4, a media converter that offers four independently configurable serial ports and an integrated, fully managed four-port ethernet switch.
-
AC-DC converter
The LD10 series 10 W, AC-DC converters have wide input voltage, DC and AC all in one, high efficiency, high reliability, low loss and safety isolation.
-
Buck-boost converter
A buck-boost converter, the AS1331, that provides continuous transitions between buck and boost mode making it suitable for dual- or triple-cell alkaline/Ni-Cad/NiMH as well as single-cell Li-Ion battery applications, has been introduced by austriamicrosystems.
-
Okami range DC/DC converters
Murata has launched the second phase of its Okami range of non-isolated single point-of-load DC/DC converters.
-
DC-DC converters
Powerbox has released Vicor’s input series for the maxi, mini, micro series of DC-DC converters.
-
HPH series DC/DC converters
Murata has released two ranges of single output, half-brick, isolated DC/DC converters.
-
SAR ADC
Linear Technology has introduced the LTC2366, a 12-bit successive approximation register (SAR) ADC that outputs data at up to 3 Msps in six- and eight-lead TSOT-23 packages.
-
Dual ADC drivers
Linear has announced the LTC6420-20 and LTC6421-20, claimed to be the first high-speed dual differential ADC drivers with guaranteed gain matching and noise and distortion performance.
-
DC/DC power converters
Murata has launched a range of adjustable, non-isolated, point-of-load-alliance DC/DC converters.
-
Maxim DC-DC converters
Maxim has introduced the MAX5098A/MAX5099 dual output, high-switching-frequency DC-DC converters capable of delivering 2 and 1 A.
-
SD-500 series DC/DC converter
Mean Well has introduced the SD-500 series (500 W) enclosed type DC/DC converter.
-
Analog-to-digital converters
Microchip has announced a series of low-power, high-resolution delta-Sigma analog-to-digital converters (ADCs).
-
Sealed adapters
PSA120U adapters come fully sealed in non-vented, spill-proof cases and feature universal AC inputs, IEC320 C14 inlet receptacles, 0 A minimum load, no-load power consumption of less than 0.5 W at 115 VAC input, Class B electromagnetic interference compliance and cUL, UL, TÜV, CE safety approvals.
-
Signal analysis downconverter
RF Engines has been contracted by Eonic of Delft in the Netherlands to develop a digital downconverter to be used in signal processing platforms.
-
Signal analysis downconverter
RF Engines has been contracted by Eonic of Delft in the Netherlands to develop a digital downconverter to be used in a signal processing platform.
© 2012 Westwick-Farrow Pty Ltd. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of our
Terms and Conditions
and
Privacy Policy.