-
Throwing some light on electromagnetic fields
Testing the effect of electromagnetic fields on humans to find out if CFLs are safe to use.
-
Making PCBs EMC compliant
PCB board design is often governed by established cost aspects. If a designer comes up with an EMC-proof design (in theory difficult, if not impossible to achieve without actually testing it as a product), they are likely to hear that it’s going to be expensive to lay it out according to their wishes.
-
EMC and petrol engine interference
For more than a decade now, Australia has had mandatory regulations in place for electromagnetic compatibility (EMC) for the majority of electric and electronic devices.
-
Vishay LLP2510 four-line ESD-protection array
Vishay has released a 4-line ESD-protection array in the ultra-compact LLP2510 package. Featuring a compact 2.5 mm x 1.0 mm footprint and ultra-low profile of 0.55 mm, the VBUS54ED-FBL offers low capacitance and leakage current for protecting high-speed data lines against transient voltage signals.
-
EM Test N series EMC immunity test simulator range
The compact ‘N’ series multifunctional EMC immunity test simulators from EM Test, covers a wide range of 32 common EMC immunity test standards.
-
Agilent N9038A MXE EMI receiver
The N9038A MXE EMI receiver, designed for laboratories that perform compliance testing of electrical and electronic products, has been released.
-
Agilent N/W6141A electromagnetic compatibility measurement application
The N/W6141A electromagnetic compatibility measurement application for Agilent’s X-series of signal analysers is now available.
-
Em Test ESD 30N tester
The Em Test model ESD 30N is an ESD tester for simulating ESD pulses to 30 kV with discharges up to 20 Hz in both air and contact discharge modes.
-
EM Test ESD 30N ESD tester
The EM Test ESD 30N is an ESD tester for simulating ESD pulses to 30 kV with discharges up to 20 Hz in both air and contact discharge modes.
-
Westek Electronics MTE RLW series DIN-rail mounting line reactors
The MTE RLW series DIN-rail mounting line reactors provide other functions in addition to harmonics mitigation on the line side of variable speed drives.
-
EMC testing
Westek Electronics has released the Langer NNB21 line impedance stabilisation network suitable for motor vehicle conducted interference testing in accordance with CISPR 25/ISO 7637.
-
EMI test receiver
The ESL EMI test receiver is designed for cost-conscious users who want to perform precise precompliance and diagnostic measurements up to 3 or 6 GHz.
-
Static detector
The goal of an ESD program is to reduce the strength and occurrences of ESD events or electrostatic discharges.
-
EMC filters
Epcos has introduced an output filter for frequency converters.
-
Global distribution agreement
Mouser Electronics has signed a global distribution agreement with Laird Technologies, a global manufacturer of electromagnetic interference (EMI) solutions that serve the telecommunications, data communications, computer, general electronics, network equipment, aerospace, defence, automotive, and medical equipment markets.
-
A series of EMC, safety and compliance courses
Euro-engineer Keith Armstrong will be in Australia-New Zealand until July 2007 to present a series of up-to-date EMC courses to industry and the public, sponsored by EMC Technologies.
© 2012 Westwick-Farrow Pty Ltd. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of our
Terms and Conditions
and
Privacy Policy.