Products
(Displaying 101 of 101)
The Switchcraft RMAS1 is a passive, three-way, transformer-isolated microphone splitter suitable for sending a single balanced audio input to three destinations.
(+)
Omnetics Connector has added another tail termination to its micro circular product range. Micro circulars have previously been available in four barrel sizes 5, 12, 16 and 27 positions, with the tail terminations being soldercup, prewired and straight thru-hole versions.
(+)
Wave-X Heat, from ARC Technologies, is a shrinkable tube absorber, designed to integrate with wire and cable assemblies, neatly sealing junctions and connector interfaces while absorbing unwanted EMI interference.
(+)
The Vaunix Technology Lab Brick LMS series of USB-compatible synthesised signal generators covers the X-band from 4 to 20 GHz with low phase noise, fast 100 µs switching time and fine 100 Hz frequency resolution.
(+)
ODU has developed an extremely short connector within the standard push-pull series ODU Mini-Snap.
(+)
The MMVP series provides a high level of density for SMPTE 424M video and AES/EBU digital audio patching...48 channels (96 patch-points) in a 1RU 19″ rack space. Based on the design of the MVJ MidSize video jack, the all-metal, screw-in jack provides stability and durability in even the most extreme applications, including mobile situations.
(+)
The Switchcraft EH series of audio, video and data connectors built into standard panel-mount XLR housings can be loaded into an empty 19″ 1RU (1x16), 1.5RU (1x16), or 2RU (2x16) rack pre-punched with tapped 4-40 holes.
(+)
Omnetics Connector has produced a latching system on its Micro-D connectors that replaces screws with finger-release side latches.
(+)
Laird Technologies has released its Tpcm 580SP series phase change material.
(+)
Gowanda Electronics is launching its inaugural range of ultrabroadband conical inductors.
(+)
Harwin’s M40 series 1.00 mm fine pitch connectors are now available with 3D cad models and step files to make the design of new applications faster and easier for all board to board applications.
(+)
Omnetics Connector has released a sleek, low-profile connector for taking wires from an I/O connector to a PCB.
(+)
Conxall’s Micro-Con-X waterproof connectors are now available in 4-, 5-, 6- and 7-pin configurations.
(+)
Harwin says its 2 mm Datamate hi-rel connector family is now available with single-piece, machined metal backshells that provide electrical screening against RFI and EMI interference.
(+)
Taconic has introduced two laminates developed for high power applications where it is critical for the dielectric material to conduct heat away from other heat sources in the PWB design.
(+)
Clarke & Severn has expanded the range of products available online via its webshop www.cseonline.com.au
(+)
AWR Corporation has released a process design kit supporting Cree’s high-power gallium nitride (GaN) high electron mobility transistor (HEMT) monolithic microwave integrated circuit foundry process.
(+)
Omnetics Connector is using its nano-connector Bi-lobes to help handle difficult signal routing and interconnect issues.
(+)
The Cree RF GaN HEMT transistor CGH40045 is now available in a thermally enhanced pill package, suitable for small form factor HPAs, and allows reflow soldering to a heat sink. It offers the same performance in a smaller size.
(+)
The CMPA2735075F from Cree RF is a gallium nitride (GaN) high electron mobility transistor (HEMT)-based monolithic microwave integrated circuit. GaN has superior properties compared with silicon or gallium arsenide, including higher breakdown voltage, higher saturated electron drift velocity and higher thermal conductivity.
(+)
The Cree RF CGH40006S is claimed to be the first GaN HEMT transistor in a QFN plastic package.
(+)
The Cree RF CGH35240F and CGH31240F are S-band, 240 W pulsed radar GaN HEMT transistors fully matched to 50 Ω. The CGH31240F operates from 2.7-3.1 GHz, while the CGH35240 operates from 3.1-3.5 GHz. They are both suitable for short and long pulse applications with good signal fidelity.
(+)
ODU has developed high-bandwidth connectors both in its standard program and in user-specific systems.
(+)
Harwin’s M80 Mix-Tek miniature connector system with high-performance contacts reduces space and weight in board-to-board, board-to-cable and cable-to-board applications. The system mixes high power and signal contacts in the same secure polarised connection.
(+)
The RF-301 from Taconic is a development of the company’s RF-30 generation. Highest PIM (passive intermodulation) performance, coupled with a good price/performance ratio, is claimed to make it the new standard for DK 3.0 substrates.
(+)
The RoHS 6/6 compliant STC5420 series is a single-chip clock synchronisation solution for applications in SDH/SETS, SONET and synchronous ethernet network elements. The devices are fully compliant with ITU-T G.813 option one and two and Telcordia GR1244 and GR253.
(+)
Omnetics Micro-D connectors for high-reliability aerospace, military, medical, optics, guidance systems, space and unmanned aerial vehicle (UAV) applications are available from nine to 51 contacts with termination types ranging from wire-to-wire, surface mount, solder cup, and thru-hole.
(+)
The Mini Circuits PWR-2.5GHS-75 smart power sensor is a 75 Ω, pocket-sized, precision test USB HID device (no driver installation required) that turns a Windows or Linux PC into a power meter.
(+)
Harwin, the hi-rel connector and SMT board hardware manufacturer, says that users of its C90 industrial range of circular connectors have available 360° EMC screening via a new series of screening braid adapters.
(+)
The ODU-MAC modular connector system from ODU is equipped with a range of combination possibilities and with particular modules such as customisable frames, plastic insulation bodies and removable crimp contacts for power, signal, coax, air couplings and fibre-optic connections.
(+)
Harwin EZ-coin cells feature single-piece, low-profile SMT coin cell retainer; 12.5 mm diameter x 2.5 mm thick BR1225 and CR1225 coin cell batteries; phosphor bronze - tin plated; flow-hole solder pad design to improve reflow and strengthen solder joints; dual spring contacts retain cells to the PCB; polarity is clearly marked to prevent incorrect insertion of battery; balanced and lightweight for pick and place processes.
(+)
Cree RF has released GaN HEMT transistors for frequency-agile, software defined radios, 3G/4G telecom BTS, C-OFDM data-links and satcom applications.
(+)
The first mate last break connector is suitable for many applications as many alternative energy applications and others need to ensure they are grounded when they first plug in the connector.
(+)
The CMSA30025S from Cree RF is claimed to be the first GaN MMIC SPDT switch to operate over the 300 MHz to 3 GHz range with less than 0.7 dB insertion loss, 30 dB isolation and less than 20 nec switching speed.
(+)
Cree RF has developed five GaN HEMT MMIC amplifiers that increase the range of frequencies available to X-band.
(+)
The Tflex SF600 DF has been added to Laird Technologies’ Tflex thermal gap filler range. The pad offers a compliant, silicone-free elastomer gap filler specifically designed to provide moderate thermal performance with a thermal conductivity of 2.8 W/mK to 3.0 W/mK.
(+)
The Laird Technologies Tflex XS400 series is the latest thermal pad in the thermal gap filler range, offering a compliant elastomer filler specifically designed to provide moderate thermal performance with a conductivity of 2.0 W/mK.
(+)
The Switchcraft 1625 is the newest addition to a range of TT patchbay products. Its modular design allows it to be used as an individual eight-channel patch module or mounted (up to five across) into a 1.5 RU rack tray.
(+)
The Switchcraft RMAS8C, RMAS8CPRO, RMAS8 and RMAS8PRO are 8-input, 24-output (three-way) dual transformer isolated audio splitters. A line level pad on each input channel allows connection of either mic or line level audio signals.
(+)
The E and EH series of wall plates from Switchcraft is suitable for custom connector configurations on standard-size wall plates. Options include single and double gang with zero, one, two and four connector holes.
(+)
The SC800CT from Switchcraft converts the unbalanced outputs of musical instruments to balanced, mic level signals that can be connected to audio consoles and mic preamps. A premium, fully shielded isolation transformer protects the purity of sound from ground loops while providing a truly uncoloured audio output.
(+)
The Switchcraft SC700CT A/V direct box converts the outputs of equipment such as MP3 players, laptops and turntables to balanced, mic level signals that can be connected to audio consoles, mic preamps and house sound systems.
(+)
Switchcraft’s ¼″ Longframe and TT/Bantam audio patchcords are built using low-capacitance 110 Ω cable suitable for analog, AES/EBU digital or SMPTE time code.
(+)
Gowanda Electronics has introduced a surface-mount inductor series, SMP1210S, that combines high current, shielding and small size with inductance values from 1.0 to 100 µH and current ratings from 205 to 1384 mA DC.
(+)
Gowanda Electronics has received QPL approval, for RF thru-hole inductors requiring ‘established reliability’ for military applications.
(+)
Antenna Factor’s Splatch embeddable antenna is now available for the medical implant communication service frequency band.
(+)
ODU has introduced the ODU-SPC connector series with new, high-power connectors specially tailored to the future market of renewable energies.
(+)
RF-35A2 is designed with an ultra-low fiberglass content to achieve‘best in class’ insertion-loss properties and a homogeneous dielectric constant throughout the laminate.
(+)
A range of surface-mount, wire management metal cable clips is available from Harwin, in four different sizes and they are specifically designed to be automatically placed and soldered directly to the PCB.
(+)
Switchcraft sealed power plugs and jacks meet IP 68/NEMA 250 (6P) waterproof ratings.
(+)
The Omnetics nano series of circular connectors is available in a breakaway configuration. The devices are said to be the smallest Mil-Quality circulars available and can withstand high shock and vibrations while maintaining their electrical integrity. The breakaway feature is suitable for applications where size and ruggedness are needed.
(+)
The EH series of panel connectors by Switchcraft is a range of audio, video and data connectors built into standard panel-mount XLR housings.
(+)
ODU has developed the Mini-Med disposable connector system.
(+)
Linx Technologies has released the relay function module 2, another member of the Linx pre-certified OEM product range.
(+)
Switchcraft has added sealed, locking power jacks and plugs to its range of DC connectors.
(+)
ODU has been certified to ISO medical standard of 13485 : 2003 + AC : 2007.
(+)
Linx Antenna Factory has released 2.4 GHz versions of its PW and CW series of antennas. These dipoles are suitable for a wide range of industrial, medical, sporting and consumer applications.
(+)
Harwin has extended its 2 mm pitch Datamate range to include mixed technology connectors with jackscrews.
(+)
A module that transmits data in the ODU MAC LC modular connector that makes it possible to connect ethernet lines has joined the modular system.
(+)
Linx Technologies has released its HW Series ½-wave centre-fed dipole antennas and ¼-wave monopole antennas, available with standard SMA connectors.
(+)
ODU has developed the SPC - single power connector product series, a combination of the ODU Lamella contacts and a rugged housing with push-pull locking.
(+)
The Linx SG and SR GPS modules and the accompanying master development system have been added to the Linx line.
(+)
ODU has switched to a new design for housing its MAC and ODU MAC LC modular connector systems.
(+)
Omnetics’ micro series of circular connectors is available with twist lock shells.
(+)
Switchcraft has expanded its EN3 range by adding moulded cord and inline connectors that mate by ‘snapping’ together.
(+)
Omnetics Connectors has available a robust latching nano connector on 0.635 mm spacing that has a positive locking mechanism that can be operated with one hand.
(+)
Switchcraft has launched an instrument direct box, the SC800.
(+)
The TAT8800 range of amplifiers is fabricated using GaAs to deliver performance with low noise and is optimised to deliver lower costs for CATV operators.
(+)
Omnetics MIL-DTL-32139 compatible hermetic connectors are suitable for high-pressure applications that require low leakage rates such as optics, cryogenics, petroleum, space and UAV systems.
(+)
The Omnetics polarised nano connectors series is the most compact yet produced by the company.
(+)
TriAccess Technologies has developed a product range of radio frequency integrated circuit (RFIC) products specifically designed to meet the RF requirements of DOCSIS-based Edge quadrature amplitude modulation (QAM) systems.
(+)
Switchcraft’s 366 and 367 impedance matching transformers are used to convert 110 Ω AES/EBU digital audio signals to 75 Ω signals and 75 Ω signals to 110 Ω.
(+)
ODU connectors for magnetic resonance tomograph devices provide between 30,000 and 60,000 mating cycles through the contacts in the spring wire system.
(+)
Recording temperatures plays an increasingly important role in engineering and high-precision temperature probes and evaluation devices are used.
(+)
Taconic’s TLX range of laminates provides tight tolerance and controlled electrical and mechanical properties.
(+)
Central Semiconductor has released the Femtomini CMNT3904E (NPN) and CMNT3906E (PNP) low VCE(SAT) transistors, packaged in the SOT-953.
(+)
The CMAD4448 120 V, 250 mA ultra high speed switching diode in the FEMTOmini SOT-923 package is designed for applications requiring a high-speed diode in an ultra-small package. The device uses 50% less board space compared with the SOD-0523, and has a 32% lower package profile.
(+)
Switchcraft has added two audio splitters that provide eight inputs and 24 dual transformer-isolated outputs.
(+)
Hermetic connectors are suitable for high-pressure applications that require low leakage rates such as optics, cryogenics, petroleum, space and UAV systems. The connectors are available in weld-able or solder-able bulkhead mounts with 9–65 positions.
(+)
Taconic’s TLX range of laminates can be sheared, drilled, milled and plated using standard manufacturing methods for PTFE/woven fibreglass materials. The laminates are dimensionally stable and exhibit virtually no moisture absorption during fabrication.
(+)
ODU puts everything in one push-pull connector. Devices are getting smaller and smaller, and so the room available for connectors in or on these devices is becoming more and more limited. In such cases, it is often necessary to combine individual connectors into one — for example, fluids, electricity and signals.
(+)
Mini-Circuits has released the PWR-6G+ which is a Multi Channel USB Power Sensor with a 50 dB dynamic range. The USB power sensor comes with power meter software that turns the PC/laptop into a power meter.
(+)
ODU has developed a small plastic cylindrical connector with bayonet locking with: three contact positions; max outer diameter of 10 mm; max length when inserted of 75 mm; bayonet-locking; easy handling; and low weight.
(+)
Clarke & Severn has available Switchcraft EN3 weathertight connectors and overmolded cables to IP68.
(+)
Central Semiconductor has released the CMAD6001 ultra low leakage diode in the SOD-923 package. This device is a 100 V, 250 mA diode with a low leakage current (IR) of 0.5 nA max., and low capacitance of 2.0 pF max.
(+)
The 3D models of Omnetics connectors are created into STEP Files (.stp) made for insertion\imported into a variety of different CAD programs (ProE, Solidworks, Inventor, etc). These files are used by engineers/designers to aid in their design of inter-connects within their particular application.
(+)
For high-reliability applications, Harwin has launched Trio-Tek Datamate, the auto-crimp open barrel crimp contact for automated high- and medium-volume applications.
(+)
Omnetics miniature circular medical connectors assist patient interface electronics. The connectors are available in three diameters and contacts from 2 to 27 pins with 0.05" centres with a latching option.
(+)
Conxall has introduced the series of Con-X product, the Field Installable Shielded Multi-Con-X.
(+)
Switchcraft has extended its IP68-rated EN 3 range by adding panel mount receptacles that have right-angle PCB terminals.
(+)
Mini-Circuits offers a wide range of plug-in, surface-mount and coaxial component kits to aid the engineer during the evaluation, design and the prototype processes. In addition, there are also kits offered to provide components for use in the testing laboratory.
(+)
Central Semiconductor will continue to produce devices that have been proclaimed EOL (End of Life) by various manufacturers. The company's policy is to continue to manufacture these devices as long as there is industry demand.
(+)
The panel mount EN3 Series from Switchcraft has been expanded to include Right-Angle PCB Mount Panel Mountable Connectors. A patented grommet and O-ring-free design, and gold-plated pins and contacts ensure quick assembly with uninterrupted connectivity. It claims to be the only IP68 rated right-angle PCB mount connector on the market with no intermediate PC board.
(+)
Originally conceived for use in the medical area, the MEDI-SNAP push-pull series has developed into a connector for all industrial areas. MEDI-SNAP has 11 different contact inserts and maximum of 14 contact positions with an outer diameter of 14 mm.
(+)
Antenna Factor's WRT Series antenna is suited to applications that require an unobtrusive, tamper-resistant antenna solution, such as wireless vending, security, traffic or power equipment.
(+)
The MG inductor series from Gowanda Electronics provides a breakthrough in inductor component technology. Inductors manufactured using traditional methods can exhibit magnetic characteristics that are undesirable in certain applications. Gowanda's MG series is manufactured using a novel approach that assures the inductors have non-magnetic characteristics.
(+)
Switchcraft has extended its innovative and popular range of StudioPatch patchbays by adding audio pass-through panels and ready-made DB25 cables.
(+)
For high-reliability applications, Harwin has introduced the Datamate L-Tek, J-Tek and Mix-Tek connectors, which offer an improved accuracy of co-planarity in situations requiring horizontal or vertical board mounting.
(+)
Omnetics Connector Corporation has expanded its manufacturing department by setting up a new service to assist its customers through the design phase. Now, by being able to offer samples and prototypes to customers for Initial Test, Biocompatibility and FDA Approvals.
(+)
Whether in medical, military, automotive, avionics or aerospace technology - more and more the demand is required for 100% sealed tight connectors.
(+)
Harwin's Hot Shoe technology connectors employ spring-loaded or compliant contacts, which maintain a positive contact force against the mating half of the connector, ensuring reliable connection even under the most demanding conditions.
(+)
