The XCalibur4646, from X-ES, is a secure, high-performance, 6U OpenVPX single-board computer based on the Intel Xeon D-1500 family of processors.
The next generation of Crystal Group's rugged rackmount products include a host of robust enhancements, including a jump in compute performance, greater scalability, increased security and more agility to adapt to changing technologies.
Alta Data Technologies has released a high-density (up to 10 channels) XMC MIL-STD-1553 interface card — the XMC-1553. The product offers what is claimed to be the highest 1553 channel count in the industry with a PCI Express 2.1 backplane.
Crystal Group has introduced the R1112 Rugged Embedded Computer, designed for applications where high performance is needed in demanding environmental conditions.
The Dytran model 7705A1 Extended Low Frequency (ELF) accelerometer combines piezoelectric and a variable capacitance MEMS element as a single output, to create wide frequency response bandwidth from DC (0 Hz) to 10 kHz.
The MetroSpec Stirling LCD Controller Board is used to control and display images and information on high-resolution LCD panels.
Acromag is now offering its PS5R Slim Line range of nine power supplies with universal voltage inputs.
The XPedite5205 XMC/PMC-based Embedded Services Router (ESR) runs Cisco IOS Software with Cisco Mobile Ready Net capabilities, providing secure data, voice and video communications to stationary and mobile network nodes across wired and wireless links.
FUTEK's MBA500 torque and thrust biaxial load cell is designed to measure reaction torque moments as well as tension and compression loads, all in one transducer.
The FUTEK LCB200 Rod End Load Cell (tension/compression) is designed for applications involving inline actuators or hydraulic jacks with male/female threads. The load cell has low deflection and can easily thread in line into a threaded rod actuator.
Dytran Instruments has released the model 3543A — a high-temperature, 100 mV/g, internally electrically isolated triaxial accelerometer.
Dytran Instruments has announced the release of the Series 3493A ultraminiature, low-noise, IEPE triaxial accelerometer.
Dytran Instruments has announced the release of the 3310A — an innovative, ultraminiature, high-temperature, isolated, charge mode accelerometer.
IPETRONIK's X-LINK device series has been extended by a fast 6-channel measurement module for RLDA and STG applications. The Mx-STG2 6 supports TEDS (transducer electronic data sheet) sensors just like the Mx-SENS2 8, Mx-SENS2 4 and Sx-STG do.
Dewesoft's VIBRO KIT is designed for simulating rotating machinery measurements. It is suitable for use in educational settings, such as schools and university laboratories, by providing a playground for countless experiments.
Dewesoft has introduced the SIRIUSwe HD 16xSTGS EtherCAT unit. The waterproof, high-density data acquisition model has been built to withstand harsh environments in a multitude of industries, including military, mining and automotive.
Dewesoft has expanded the KRYPTON product line for the KRYPTON 6xSTG module. KRYPTON DAQ modules are engineered precisely to operate in harsh conditions such as heat, dust, mud, water and snow.
FUTEK has announced the QTA141 Micro Reaction Torque Sensor. With a miniature footprint of 22 mm in diameter by 10 mm in height, the sensor was designed to provide a precision torque measurement solution for miniature DC servo motors.
Futek Advanced Sensor Technology announces the QLA383 Portable Calibration Kit — a three-channel monolithic force sensor calibration tool used to audit testing probes for touch-screen devices.
Acromag's VPX4820 is a non-intelligent mezzanine carrier card, providing a simple solution for interfacing a PMC or XMC module to a VPX computer system.
Acromag offers rugged OpenVPX carrier cards to deliver high-speed performance for data-intensive, high-bandwidth applications.
Acromag has announced its latest PCIe-based AcroPack modules, the AP500 Series. The boards offer up to eight RS232 or RS422/485 communication ports with 256 B FIFO buffers, minimising CPU interaction for improved system performance.
Reverse osmosis systems require constant pressure delivered from a system of pumps to maintain membrane health and maximise system efficiency.
Acromag's i2o peer-to-peer communication on the XT1111 Modbus/TCP discrete I/O module can send one signal from a central control room PLC that can be split and retransmitted to many remote sites at the same time.
Futek LSB series load cells offer a broad capacity range as well as many capabilities that are suitable for inline endurance applications from industrial automation to delicate medical testing.
The Acromag VPX4810 is a 3U mezzanine carrier card providing a simple solution for interfacing a PMC or XMC module to a VPX computer system. The carrier card routes power and bus signals to a plug-in mezzanine module through the VPX card slot connector.
Acromag's high-performance XMC FPGA modules allow users to develop and store their own instruction sets in the FPGA for a variety of adaptive computing applications.
IPETRONIK has released the M-THERMO2 HV — a CAN temperature-measuring module with four type K thermocouple inputs offering maximum protection on high-voltage potentials up to ±846 V.
Extreme Engineering Solutions (X-ES) has announced the Intel Xeon D-1500 family processor-based single-board computers, designed to address the environmental and security challenges inherent in military and aerospace applications.
FUTEK's LSB210 submersible S-beam load cell fixed to a testing system can be used to measure the trackability of a catheter through a tortuous anatomy.
Load cells give researchers the ability to monitor the force applied to their test specimens. Futek's solution for biomaterial testing includes its inline load cell (LCM Series) paired with instrumentation and software.
FUTEK's LSM300 Precision Load Cell (also known as the Belt Buckle Load Cell) offers a lightweight design with an easy side-mounting feature, making it suitable for OEM applications.
The M-UNI2, from Ipetronik, offers temperature and voltage measurement with a single device. The flexible module is suitable for mobile testing as well as test bench applications.
The AcroExpress VPX6600 3U OpenVPX single-board computer utilises the 6th Generation Skylake Intel Xeon processor and C230 PCH chipset for extensive I/O support.
Alta Data Technologies' PCCD-1553 and ECD54-1553 interface modules are multichannel (1–2) 1553 cards supported by the latest software technologies.
Futek offers full system calibration services for sensors with digital displays, amplifiers and/or USB solutions using calibration procedures in compliance with ISO 17025:2005 standards.
Alta Data Technologies' PCIE4L-1553 interface module is a multichannel (1–4), ½ size, 4 Lane PCI Express 1553 card supported by the latest software technologies.
The XChange3021 10 Gigabit Ethernet switch module provides both 10 Gigabit Ethernet and PCI Express Gen3 functionality, which allows the product to serve as the heart of interboard communications inside a high-end OpenVPX system.
The Dytran Model 3316C2 is an electrically isolated, ultrahigh-temperature, piezoelectric charge mode accelerometer designed to operate in temperatures up to 530°C.
The R2DB Vehicle Multi-Analyser, from DEWESoft, is a battery-powered portable instrument designed in accordance with MIL standards. It is capable of withstanding rugged conditions, making it suitable for construction and military applications.
Crystal Group has announced the expansion of its rugged switch line with the introduction of the RCS7450 and RCS7750 rugged switches. Designed for deployment in harsh environments, the rugged switch line provides robust networks with long-term field operation.
FUTEK's IHH500 handheld display is a versatile tool compatible with strain gauge sensors. Whether the application involves load cells, torque sensors or pressure sensors, the product is durable enough for continual automation applications and precise enough for delicate medical testing.
Futek's TTF400 Reaction Torque Sensor can be used for hinge fatigue testing, demonstrating how test and measurement professionals are able to replicate the stress hinges undergo by mimicking up to 100,000 times the movements the hinge will undergo in real-life scenarios.
The Futek LCM200 is a miniature tension and compression load cell built for endurance or inline tension or compression applications.
The Futek LCF400 pancake load cell has been designed to resist high extraneous loads, primarily due to its one-piece construction. Typical applications include fatigue and endurance testing where long performance cycles are required.
The Acromag ACEX-4600 COM Express carrier is a rugged COM Express modular platform, designed with rigid PCBs and extended temperature support for extreme industrial and defence applications.
The Futek Model LLB250 miniature load button is built for press or inline compression applications.
Acromag has expanded its BusWorks XT Series of ethernet I/O modules to include models with multiple I/O functionality.
Crystal Group has launched the RE1312 Rugged Embedded Computer, a lightweight computer with the capability to bring powerful computer processing to a variety of transportation platform applications.
A full line of microBlox isolated signal conditioning modules is now available from Acromag. Offering over 175 models, the microBlox uB modules can safely interface a wide variety of voltage, current, temperature, frequency and other field signals with a ±5 V or 0–5 VDC output to host measurement and control systems.
The Argon ARD21 21.3″ rugged display is designed for command and control applications where maximum viewable surface area is needed in the smallest mounting possible.
Crystal Group has recently announced the introduction of the RE1401 NUC (Next Unit of Computing), a compact, high-performance, rugged embedded computer appropriate for operational deployment in harsh environments.
FUTEK Advanced Sensor Technology has announced LLB130, a subminiature, lightweight, load button load cell. The company's engineers have improved the accuracy of the product to non-linearity of ±0.5% and deflection of 0.002″ nominal.
FUTEK Advanced Sensor Technology announces the LCM100, an ultraminiature threaded load cell with a capacity range from 1000 g to 11.3 kg.
Acromag's compact, industrial-grade isolator provides a high-voltage isolation barrier between a computer and a connected USB device. The product protects equipment from electrical surges and transient voltage spikes as well as eliminating ground loop currents flowing between the PC and peripherals.
Crystal Group has announced the introduction of the RS4104 and RS4198L24, two high-performance and highly configurable rugged servers.
Extreme Engineering Solutions (X-ES) announces its first NXP QorIQ ARM-based board, the XPedite6401 XMC/PrPMC mezzanine module. The product is a good choice for a wide variety of applications that demand low power consumption coupled with high-performance processing.
Acromag's PCIe-based AcroPack general-purpose I/O mezzanine modules for embedded computing applications are an extended version of the mPCIe specification. Featuring a 100-pin connector to handle the I/O, they provide a modular approach to system assembly, enabling application-specific customisation.
X-ES now provides a modified, lightweight version of the NXP hypervisor that supports partitioning and isolation for the company's NXP QorIQ single-board computers and processor mezzanine modules.
Acromag's XVME-6700 is a high-performance 6U VME single-board computer based on the Intel Celeron 2002E processor and utilising the Intel 8-Series QM87 QM87 PCH chipset for extensive I/O support.
Designed to reduce installation and test set-up costs while improving signal quality, the 16-channel PI 7200 and PI 7300 data acquisition systems (DAS) function as ethernet-connected appliances that condition, amplify and digitise outputs from strain gauges, bridges, IEPE or voltage transducers.
NextComputing has released the Vigor ED portable workstation for maximum performance and storage in tough environments.
Acromag's XMC-7A200 is an XMC mezzanine module enhanced with a Xilinx Artix-7 FPGA for low power consumption and 128 M x 16-bit Quad DDR3 SDRAM processing performance.
The RS549 and RS5718L24 rugged 5U servers, from Crystal Group, are developed for applications in industries such oil and gas, public transport, utilities, mining, military and security. The servers provide high compute performance in tough environmental conditions.
Extreme Engineering Solutions (X-ES) has announced the XPand6903, a rugged, sealed, compact, fanless, embedded box PC utilising the Intel Atom E3800 family processor. The product provides a maintenance-free computing platform that is suitable for environmentally challenging and space-constrained situations.
Acromag's XMC-7K family of XMC mezzanine modules are enhanced with the Xilinx Kintex -7 FPGA for low power consumption and good processing performance. The reconfigurable FPGA is made possible via a direct download into the Flash configuration memory over the PCIe bus or the JTAG port.
Alta Data Technologies announces the release of the PC104P-MA4 interface card for PC/104-Plus
systems. The product combines MIL-STD-1553 and ARINC interface channels on a single card, providing a small footprint and low power for PC/104-based systems.
Dewesoft has released Krypton, its latest ruggedised distributed EtherCAT DAQ modules. The modules are engineered to weather all conditions and to operate in cold, hot, dusty, mud, snow and water environments.
Crystal Group has announced the RSS13S17 JBOD Rugged 1U Storage System - an extreme-duty system designed for military operations, commercial industries and demanding mission-critical applications. The product features several storage options, compatibility with existing Crystal Group hard drive sleds, individually removable drives and reliability based on successful experience with current servers.
Acromag's XVME-6410 is a high-performance 6U VME single-board computer based on the 4th Generation Intel Core i7 or i5 processor and utilising the Intel 8-Series QM87 PCH chipset for extensive I/O support. The product allows users to update their systems, rather than undergoing a total redesign.
GE Intelligent Platforms has announced the RAR15-XMC-FIO for the MIL-STD-1553 and ARINC 429 XMC front I/O module. A multiprotocol embeddable avionics module featuring front I/O, it is designed to save space, weight and power.
Acromag's BusWorks XT series of ethernet I/O modules now includes the XT1210 and XT1220 models, providing an 8-channel interface for analog voltage or current input signals and EtherNet/IP, Modbus/TCP, Profinet or peer-to-peer communication.
Acromag has released the XT1230 and XT1240 in the BusWorks XT series of ethernet I/O modules. The models provide a 16-channel interface for single-ended analog current or voltage input signals with EtherNet/IP, Modbus/TCP, Profinet or i2o peer-to-peer communication.
Alta Data Technologies' PCI-A429 interface module offers a variety of ARINC-419/429/575/573/717 channel configurations with software-selectable RX/Tx channels, baud rates, bit encoding and word configurations (start/sync/stop length, parity, bits/word, MSB/LSB). The product can rncode or decode almost any ARINC-429 physical layer signal.
Acromag's XMC-6260 and XMC-6280 mezzanine modules provide a 10-gigabit ethernet (10GbE) interface solution for data-intensive, real-time embedded computing systems. High performance is achieved using a TCP/IP offload engine (TOE) ASIC connected to a PCI Express Gen2 x8 interface.
GE Intelligent Platforms has announced the XVR16 6U VME rugged single-board computer featuring quad-core 4th generation Intel Core i7 architecture. The capabilities of the product will not only allow it to address existing command/control applications, but also to be deployed in demanding high-performance embedded computing (HPEC) signal processing applications.
NextComputing has added Intel Xeon E5-2600v2 processors to its line of portable workstations, compact towers and high-density rack-mount computers. The processors offer up to 12 processor cores per CPU, allowing power users in many industries to work fast and efficiently.
The Acromag ST130 temperature transmitters are USB configured, loop powered and provide a proportional 4-20mA output.
Alta Data has combined the 32-bit FPGA protocol engine AltaCore with a real-time IP/UDP thin server in a small, low power, rugged box.
Alta Data Technologies’ MPCIE-A429 Mini PCI Express F1 interface module offers a variety of ARINC-429/575/717 channel configurations with software-selectable RX/TX channels, baud rates, bit encoding and word configurations (start/sync/stop length, parity, bits/word, MSB/LSB).
eNet-A429 is an interface card that provides remote connection of ARINC operations on 10/100/1000 ethernet IP/UDP local area networks.
Alta Data Technologies’ MPCIE-1553 is a mini PCI Express full mini type 2 interface off the shelf (COTS) card for MIL-STD 1553 networks.
The Acromag TT230 series of isolated transmitters are PC/Windows-programmable via USB for conversion of temperature, voltage and current inputs to sink/source-compatible 4-20 mA control signals.
The Dytran model 3220M27 is a low-profile, ring-shaped IEPE accelerometer with an overall weight of just 2.7 g.
The Acromag ACEX4405 is a rugged carrier board for COM Express modules offering a wide assortment of peripheral I/O connections and a mini PCIe slot for production or prototype systems.
These IEPE accelerometers are designed for mounting in spaces typically inaccessible to accelerometers.
The 3122C series of piezoelectric accelerometers offers either 50 pc/g or 15 pc/g of sensitivity in applications with temperatures up to +191°C.
Simultaneous sampling Trion plug-in modules combine the modularity of PXI with a larger front panel.
GE Intelligent Platforms has released the latest addition to its range of COM Express modules with the launch of the rugged bCOM6-L1400.
The Dewe-Orion-1616-100X series of multichannel cards has a 1 MS/s sample rate and gap-free storage.
Cortron’s model 121 series of keyboard/pointing devices are rugged and industrial versions built to withstand hostile and demanding industrial and military environments.
GE Intelligent Platforms has added to its range of COTS rugged systems with eight packaged, pre-validated, ready-to-run, rugged data/processing control computer systems for a broad range of military and commercial applications.
Futek has released the IHH500 intelligent digital display, a multipurpose digital display, used as a handheld device, that can be configured as bench top and/or wall mount.
GE Intelligent Platforms has released the Wolverine III rugged flat panel computer, designed to withstand harsh, hazardous applications such as oil and gas exploration and drilling where salt, spray, dust, shock, vibration and extremes of temperature are present.
The Dytran 3059A is a low profile IEPE accelerometer featuring a thru hole 1/4-28 mount and radial two-pin MIL-C-5015 connector.
Futek has released the IPM650 intelligent panel meter to gradually replace the IPM5490/IPM500 family.
Dytran Instruments has released the 3334A1, a miniature IEPE accelerometer designed for environmental stress screening and product response testing applications.
The RTR8GE router features a small footprint, low weight and low power and enables communications on the move.
Futek Advanced Sensor Technology has introduced its upgraded CSG110 strain gauge signal amplifier.
Dytran Instruments has introduced model 3315A, a high frequency IEPE accelerometer designed for use in health and usage monitoring systems as well as active vibration control of commercial and military aircraft.
NextComputing has released a portable monitor for laptop users who require multiple high-resolution displays.
NextComputing has enhanced its Nucleus compact graphics workstation to allow professional users to work in an immersive 3D environment within their favourite graphical software.
Astro-Med has introduced a lightweight and compact portable data acquisition system.
GE Intelligent Platforms has released the EC12, a 6U CompactPCI single board computer, designed for embedded computing environments in which entry and mid-level performance is required.
Dytran Instruments has released its latest model to the family of 3023A series miniature triaxial accelerometers.
GE Intelligent Platforms has released its rugged automatic video tracker.
Dewetron has introduced two galvanically isolated multi-sensor amplifiers with linearised analog output. The module connects to any thermocouple and measures additional voltage, Pt100 to Pt2000, constant current supplied bridges and resistance.
The portable DEWE-3020 is said to be the smallest, rugged ‘all-in-one’ measurement system for galvanically isolated amplifiers. It includes a built-in touch screen, high isolation signal inputs, high sampling rates - up to 1 MSps, up to 24-bit resolution and a data throughput of 70 MBps.
The MS12 1500PC embedded device has been designed and manufactured to operate in harsh conditions while providing viewable and workable data, whatever the environmental conditions.
GE Intelligent Platforms has announced two rugged single board computers based on second-generation Intel Core i7 Sandy Bridge processors.
GE Intelligent Platforms has announced the DSP280 rugged dual-socket quad-core 6U VPX multiprocessor, designed to meet the real-time demands of applications such as ISR (intelligence, surveillance, reconnaissance), radar, sonar and image and sensor processing.
Dytran Instruments has introduced a series of DC response accelerometers, models 7500M10 and 7500M11 that are DC-coupled analog variable capacitance devices for both commercial and military applications.
Dytran Instruments has introduced the model 3302A, a biaxial IEPE accelerometer designed to provide dynamic vibration monitoring within active vibration control applications typically found on commercial and military aircraft..
Dytran Instruments has introduced the model 1022V IEPE force sensor, designed to offer low-mass dynamic measurement capabilities within the company’s smallest and most lightweight package.
Dytran Instruments has introduced the model 3091A IEPE accelerometer, designed for use in health and usage monitoring systems and active vibration control of commercial and military aircraft.
GE Intelligent Platforms has announced the NETernity CP921RC-30x 6U CompactPCI 24-port gigabit ethernet switch.
GE Intelligent Platforms has released the WANic 6354 intelligent high-performance packet processor designed for high-volume IP network applications.
Futek has released its LPM200 panel-mount load cell, a miniature device with an optional USB output.
Futek has added to its USB sensor range with the LTH350 donut/thru hole load cell with a USB output option.
Futek has released the LLB400, a miniature load button load cell that has a high accuracy with a deflection of 0.0015-in nominal. It is also available with a USB output option.
Dytran Instruments has announced the 4190 portable vibration meter for field testing accelerometers, which can be used in conjunction with a handheld shaker for sensor validation.
The MetroSpec Rugged Industrial 12.1-inch Model MS12 1500PC panel PC has been designed to operate in harsh conditions while providing viewable and workable data.
Dytran Instruments has released an IEPE triaxial accelerometer, Model 3293A, a lightweight, high-sensitivity accelerometer containing three miniature ceramic shear mode accelerometer elements mounted to a single support and welded into a titanium housing.
GE Fanuc has announced the A10200 ATCA single board computer, with a dual Xeon 5500 series dual- or quad-core processor and up to 64 GB of DDR3 SDRAM.
Dytran Instruments has released a miniature triaxial accelerometer, using quartz shear technology, coupled with 2-wire internal IEPE electronics.
Dytran Instruments has released a series of ring-style charge output force sensors.
Dytran Instruments has introduced its latest model to the 3224A series of ultra miniature IEPE accelerometers.
GE Fanuc Intelligent Platforms has announced the VPXcel6 SBC620 rugged 6U VPX single board computer.
GE Fanuc has announced the NETernity RM983RC VME ethernet switch, designed for applications in industrial, commercial, government, telecommunications and defence applications.
GE Fanuc Intelligent Platforms has announced the ICS-1556B 4-channel 400 MHz 14-bit ADC PMC module.
GE Fanuc Intelligent Platforms has announced the VPXcel3 SBC341 3U VPX rugged single board computer.
Dytran has released an addition to the 3023A family of miniature triaxial accelerometers.
GE Fanuc Intelligent Platforms has announced the V7875 single board computer for 6U VME solutions with increased processing performance, lower power consumption, extensive I/O capability and good graphics.
The Telum ASLP11 with Core Duo L7400 1.5 GHz processor is a single-width, full- or mid-sized ACM processor board of up to 4 GB memory and is designed for distributed ATCA/Micro TCA processing applications such as wireless base stations, voice over packet, test and measurement, server blades and other enterprise-wide computing.
GE Fanuc has announced the AT2-5800 IP packet processor advanced TCA blade.
GE Fanuc has announced two gigabit ethernet switches.
Released by Crystal Group is the RD2120C, a 20.1" table-mount LCD with a stainless lid and aluminium base.
Dytran has introduced an ultra-miniature IEPE accelerometer with titanium housing. Weighing 0.2 g, this miniature accelerometer reduces mass loading effects.
Computer Dynamics has announced SealTouch-15 rugged flat panel computers in an environmentally sealed enclosure that can be installed on an arm.
GE Fanuc Intelligent Platforms has announced the Telum GE-QLX/QSX gigabit ethernet AdvancedMC.
Dewetron has released the DEWE 201 data acquisition recorder, a portable and rugged device consisting of a solid-state disk for environments where shock and vibration are present.
The 2301B probe-type pressure sensors are designed to measure fast pressure transients such as those encountered in field blast and shock tube applications.
Astro-Med has released the Dash 2EZ+, a handheld, portable data acquisition recorder.
GE Fanuc has announced the ICS-1554 PMC module with four 16-bit ADCs sampling synchronously at frequencies up to 160 MHz.
GE Fanuc has announced the V7768 and V7769 6U VMEbus single board computers.
GE Fanuc Embedded Systems has announced its 6U CompactPCI C2K single board computer. The device uses the 1 GHz MPC7447A or 1.4 GHz MPC7448 Freescale processor and extensive I/O ports for improved performance and flexible functionality.
The Telum NPA-3804 is a modular package designed to meet performance and thermal requirements with secure high-speed connectivity and complex packet processing at wire speed performance.
Secure Communication Systems has released Air Warrior II - Electronic Data Manager, a kneeboard computer system that is a rugged, lightweight and portable which uses the Windows XP Professional operating system in a configuration optimised for wearable, kneeboard requirements.
VarTech Systems has released an all-weather, fully submersible series of flat LCD screen monitors.
VarTech Systems has introduced the VTPC150SE all-in-one monitor and computer that can survive the harshest washdown environments.
SBS Technologies has announced VD-FOE ethernet port failover software for the VxWorks real-time operating system.
SBS Technologies has introduced three 6U CompactPCI single board computers.
Harwin has extended its range of PC/104 and PC/104 Plus connectors to include stack through and non-stack through variants.
SBS Technologies has introduced the Sentiris S4110-CD00-AR COTS graphics subsystem offering good performance and image quality in a conduction cooled PMC format.
Huntron Instruments has released the Tracker 2700 which now extends the capabilities of power-off testing to troubleshoot low voltage logic circuitry.