RECOM RSE and RSOE regulated SIP8 DC/DC converters
RECOM’s regulated DC/DC converters RSE (2 W) and RSOE (1 W) series were developed for a variety of industrial, transport, test and measurement applications which require onboard 5 V power supplies. The converters operate at extreme temperatures from -40°C up to +80°C at full load.
The fully upgraded DC/DC converters are offered with nominal 2:1 input voltages of 5 and 24 V and with 5 V output voltage. Tight output regulation protects against any sudden change in input voltage and keeps interference levels low and output voltage stable.
The converters are pin-compatible with the RSO, RS, RS3 and RS6 series for an easy upgrade on existing circuit boards. They are packaged in an industry-standard SIP8 housing measuring a compact 21.8 x 9.2 x 11.1 mm and have an I/O isolation of 2 kVDC.
The products reach efficiencies up to 80% at full load. At low loads, common converters fail to produce high efficiency rates; however, the RSE and RSOE series converters still reach 70% efficiency at 30% load and can even maintain full functionality down to 0% load.
They are overcurrent as well as short-circuit protected, with rapid start-up times less than 500 μs. Industrial Class A EMC levels are met with a pi-filter. All modules are certified to UL62368-1 with a CB report.
For more information, click here.
Phone: 0011 65 6276 8795
TDK Corporation's leaded EPCOS metal oxide disk varistors have been approved for an increased...
The Wurth Electronics Energy Harvesting Solution To Go Kit is a complete solution that allows...
Premier Batteries' jumpstart powerbank will start a car wherever it is. This means there is...